Part Number Hot Search : 
JCS1LW 2SA1036K 01500 4812S 74HC154P DT74F 80000 0100CT
Product Description
Full Text Search
 

To Download MGA-665P8-BLK Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Agilent MGA-665P8 GaAs Enhancement-Mode PHEMT 0.5 - 6 GHz Low Noise Amplifier
Data Sheet
Surface Mount, 2.0 x 2.0 x 0.75 mm 8-lead LPCC Description Agilent's MGA-665P8 is an economical, easy-to-use GaAs MMIC Low Noise Amplifier (LNA) with a unique active-low powerdown function. The LNA has low noise figure and high gain achieved through the use of Agilent Technologies' proprietary GaAs Enhancement-mode PHEMT process. It is housed in a miniature 2.0 x 2.0 x 0.75 mm 8-pin Leadless-Plastic-ChipCarrier (LPCC) package. The compact footprint and low profile coupled with low noise, high gain and high linearity makes the MGA-665P8 an ideal choice as an LNA for broadband generalpurpose applications. Its excellent broadband isolation also makes it a good buffer amplifier. The output of the MGA-665P8 provides a very good broadband match to 50 . Its input requires a simple external LC network to provide a low noise figure and good input return loss. Power
supply voltage is applied to both the output terminal and a separate VD terminal. A simple external bias insertion circuit consisting of a shunt inductor and a series dc block capacitor is sufficient to apply power supply voltage to the output of the MGA665P8. The MGA-665P8 provides typical device performance of 1.45 dB noise figure, 16 dB gain and an OIP3 of +18.1 dBm at 5.25 GHz, at a bias point of 3 V and 20.5 mA. Pin Configuration, Top View
GND PADDLE
Features * Active-low power-down function * Single +3 V supply operation * Low noise and high gain MMIC * Output 50 match * Excellent isolation * Minimal match and external biasing components * Housed in miniature 2 x 2 x 0.75 mm LPCC package * Pb-free & MSL-1 package Specifications * 0.5 to 6 GHz operation * At 3 V, 20.5 mA, 2.4 GHz: NF = 1.2 dB Gain = 18.4 dB OIP3 = 19 dBm * At 3 V, 20.5 mA, 5.25 GHz: NF = 1.45 dB Gain = 16 dB OIP3 = 18.1 dBm
1: GND
8: UNUSED
POWER DOWN FUNCITON: LOGIC LOW (0-1 V): POWER ON LOGIC HIGH (2-3 V): POWER OFF NOTES: 1. PINS 1, 3, AND PADDLE NEED TO BE PROPERLY GROUNDED TO OBTAIN SPECIFIED PERFORMANCE. 2. SUPPLY VOLTAGE, VD, NEEDS TO BE APPLIED AT PINS 6 & 7. SUPPLY AT PIN 7 TO BE APPLIED USING A BIAS TEE OR EQUIVALENT.
2: RFIN
7: RFOUT & VD
3: GND
6: VD
4: UNUSED
5: POWERDOWN
Attention: Observe precautions for handling electrostatic sensitive devices. ESD Machine Model = 40 V ESD Human Body Model = 150 V Refer to Agilent Application Note A004R: Electrostatic Discharge, Damage and Control.
1. Absolute Maximum Ratings[1] Symbol VD VC ID Pdiss Pin max. TCH TSTG qch_b Parameter Supply Voltage[2] Control Voltage[2] Drain Current[2] Dissipation[3] Units V V mA W dBm C C C/W Absolute Maximum 6 6 45.6 0.27 13 150 -65 to 150 44.76
Total Power
RF Input Power Channel Temperature Storage Temperature Thermal Resistance[4]
Notes: 1. Operation of this device above any one of these parameters may cause permanent damage. 2. DC quiescent conditions. 3. Board (package belly) temperature TB is 25C. Derate 29 mW/C for TB > 133C. 4. Channel-to-board thermal resistance measured using 150C Liquid Crystal Measurement method.
2. Product Consistency Distribution Charts at 5.25 GHz, 3.0 V, Id = 20.5 mA[5,6]
160 Stdev = 0.067
180 Stdev = 0.23 150
120
FREQUENCY FREQUENCY
120 90 60 30 -3 Std
80
+3 Std
40
0 1.2 1.3 1.4 1.5 1.6 1.7 NF (dB)
0 17 17.5 18 OIP3 (dB) 18.5 19
Figure 1. NF; nominal = 1.45.
Figure 2. OIP3; LSL = 17.8, nominal = 18.2.
180 Stdev = 0.20 150
400 Stdev = 0.11 300
FREQUENCY
90 60 30 0 15
-3 Std
+3 Std
FREQUENCY
120
200
-3 Std
+3 Std
100
0
16 GAIN (dB)
17
11
11.5 P1dB (dB)
12
Figure 3. Gain (dB); nominal = 16 dB.
Figure 4. P1dB; LSL = 11, nominal = 11.4.
Notes: 5. Distribution data sample size is 500 samples taken from 3 different wafers lots. Future wafers allocated to this product may have nominal values anywhere between the upper and lower limits. 6. Measurements are made on production test board described in Figure 5, which represents a trade-off between optimal OIP3, P1dB, Gain and NF. Circuit losses have been de-embedded from actual measurements
2
3. MGA-665P8 Electrical Specifications TA = 25C, DC Bias for RF Parameter is VD = 3.0 V (unless otherwise specified) Symbol VC ID ID (Off) Gtest[7] NFtest[7] OIP3test[7,8] P1dBtest[7] Psattest[7] IRLtest[7] ORLtest[7] Ga[8] Parameter and Test Condition Control Voltage Device Current Off current Gain Noise Figure Output Third Order Intercept Point Output Power at 1dB Gain Compression Output Power at Saturation Input return Loss Output Return Loss Associated Gain at NFo VC = 3 V Freq = 5.25 GHz Freq = 5.25 GHz Freq = 5.25 GHz Freq = 5.25 GHz Freq = 5.25 GHz Freq = 5.25 GHz Freq = 5.25 GHz Freq = 0.9 GHz Freq = 2.4 GHz Freq = 3.5 GHz Freq = 5.25 GHz Freq = 5.8 GHz Freq = 0.9 GHz Freq = 2.4 GHz Freq = 3.5 GHz Freq = 5.25 GHz Freq = 5.8 GHz Freq = 0.9 GHz Freq = 2.4 GHz Freq = 3.5 GHz Freq = 5.25 GHz Freq = 5.8 GHz Freq = 0.9 GHz Freq = 2.4 GHz Freq = 3.5 GHz Freq = 5.25 GHz Freq = 5.8 GHz Units V mA A dB dB dBm dBm dBm dB dB dB Min. 18.2 14.5 16.5 Typ. ON: 0-1 V Off: 2-3 V 20.5 180 16 1.45 18.2 11.4 15 18 20 22.58 18.42 16.99 16.00 17.16 1.30 1.18 1.36 1.45 1.44 21.26 19.02 17.30 18.10 17.89 8.62 7.41 6.89 7.80 8.32 Max. 23.8 220 17.5 1.9 -
NFo[8]
Optimum Noise Figure (Tuned for Lowest Noise Figure)
dB
-
-
OIP3[8,9]
Output Third Order Intercept Point at NFo
dBm
-
-
P1dB[8]
Output Power at 1 dB Gain Compression Point at NFo
dBm
-
-
Notes: 7. Measurements obtained using production test board described in Figure 5, which represents a trade-off between optimal OIP3, P1dB, Gain and NF. Circuit losses have been de-embedded from actual measurements. 8. Measurements obtained using test fixture with input tuned for low noise figure. Gain, OIP3 and P1dB were measured at this tuned condition. Tuner and fixture losses have been de-embedded from actual measurements. The supply is connected to ground via a bypass capacitor. The OIP3 is approximately 3 dB lower without this bypass capacitor. 9. OIP3 test condition: Pin = -20 dBm, Df = f1 - f2 = 10 MHz.
3
8.2 nH 1000 pF VD = 3 V 9.1 2.2 nH 3 pF
0.6 pF RFIN
1 nH RF0UT 0.2 pF
Figure 5: Simplified schematic of 5.25 GHz production test board, which represents a tradeoff between Gain, NF, OIP3, P1dB and return loss measurements. Circuit losses have been deembedded from actual measurements.
4. MGA-665P8 DC Performance Curves (at 25C unless specified otherwise)
40
25
2.7 V 3.0 V 3.3 V
35 20
30
CURRENT (mA)
CURRENT (mA)
-40C 25C 85C
25 20
15
15
10
5
10
5 1.5 2.0
2.5
3.0
3.5
4.0
4.5
5.0
0
0
0.5
1.0
1.5
2.0
2.5
3.0
VOLTAGE (V)
CONTROL VOLTAGE (V)
Figure 6. Current vs. supply voltage.
Figure 7. Current vs. control voltage.
4
5. MGA-665P8 Performance Curves Tuned For NFmin at VD = 3.0 V, VC = 0 V, ID = 20.5 mA[10] (at 25C unless specified otherwise)
1.8 1.6
24 22 20
22 20 18
NOISE FIGURE (dB)
1.4
GAIN (dB)
1.2 1.0 0.8 0.6
-40C 25C 85C
18 16 14 12
-40C 25C 85C
OIP3 (dB)
16 14 12
-40C 25C 85C
0.4 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz)
10 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz)
10 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz)
Figure 8. Minimum noise figure vs. frequency and temperature.
Figure 9. Associated gain measured at NFmin tuned condition vs. frequency and temperature.
1.8 1.6
Figure 10. Output third order intercept point measured at NFmin tuned condition vs. frequency and temperature.
24 22 20
10 9
NOISE FIGURE (dB)
8
1.4 1.2 1.0 0.8 0.6 0.4 0.5 1.5 2.5 3.5
2.7 V 3.0 V 3.3 V
P1dB (dB)
7 6 5 4
-40C 25C 85C
GAIN (dB)
18 16 14 12
2.7 V 3.0 V 3.3 V
3 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz)
4.5
5.5
10 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz)
FREQUENCY (GHz)
Figure 11. Output power for 1 dB gain compression measured at NFmin tuned condition vs. frequency and temperature.
Figure 12. Minimum noise figure vs. frequency and voltage.
Figure 13. Associated gain measured at NFmin tuned condition vs. frequency and voltage.
22 20 18
10 9 8
P1dB (dB)
2.7 V 3.0 V 3.3 V
OIP3 (dB)
7 6 5 4
2.7 V 3.0 V 3.3 V
16 14 12
10 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz)
3 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz)
Figure 14. Output third order intercept point measured at NFmin tuned condition vs. frequency and voltage.
Figure 15. Output power for 1 dB gain compression measured at NFmin tuned condition vs. frequency and voltage.
Note: 10. Measurements obtained using test fixture with input tuned for low noise figure with a double stub tuner. Gain, OIP3 and P1dB were measured at this tuned condition. Tuner and fixture losses have been de-embedded from actual measurements. The supply is connected to ground via a bypass capacitor. The OIP3 is approximately 3dB lower without this bypass capacitor.
5
6. MGA-665P8 Performance Curves with 50 Input and Output at VD = 3.0 V, VC = 0 V, ID = 20.5 mA[11] (at 25C unless specified otherwise)
2.2 2.0
NOISE FIGURE (dB)
24 22 20
22 20 18
1.8
GAIN (dB)
1.6 1.4 1.2 1.0
-40C 25C 85C
18 16 14 12
-40C 25C 85C
OIP3 (dB)
16 14 12
-40C 25C 85C
0.8 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz)
10 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz)
10 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz)
Figure 16. Noise figure (50 ) vs. frequency and temperature.
Figure 17. Gain (50 ) vs. frequency and temperature.
Figure 18. Output third order intercept point (50 ) vs. frequency and temperature.
10 9
2.0 1.8
24 22 20
NOISE FIGURE (dB)
8
1.6 1.4 1.2 1.0 0.8
2.7 V 3.0 V 3.3 V
7 6 5 4
-40C 25C 85C
GAIN (dB)
P1dB (dB)
18 16 14 12
2.7 V 3.0 V 3.3 V
3 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz)
0.6 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz)
10 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz)
Figure 19. Output power for 1 dB gain compression (50 ) vs. frequency and temperature.
Figure 20. Noise figure (50 ) vs. frequency and voltage.
Figure 21. Gain (50 ) vs. frequency and voltage.
6
22 20 18
10 9 8
25 15
S-PARAMETERS (dB)
5 -5 -15 -25
S22 S21 S11
P1dB (dB)
2.7 V 3.0 V 3.3 V
OIP3 (dB)
7 6 5 4
2.7 V 3.0 V 3.3 V
16 14 12
10 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz)
3 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz)
-35 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz)
Figure 22. Output third order intercept point (50 ) vs. frequency and temperature.
Figure 23. Output power for 1 dB gain compression (50 ) vs. frequency and voltage.
Figure 24. S-Parameters (50 ) vs. frequency.
20
6 5 4
VSWR_IN VSWR_OUT
15
10
VSWR (n:1)
Pout vs. Pin GAIN P1dB
Pout (dBm)
3 2
5
0
1 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz)
-5 -20
-15
-10
-5 Pin (dBm)
0
5
10
Figure 25. Output power and gain vs. input power at 5.25 GHz.
Figure 26. Input and output VSWR (50 ) vs. frequency.
Note: 11. Measurements obtained using a 50 test fixture with input and output connected directly to the fixture. Gain, OIP3 and P1dB were measured at this 50 condition.
7
7. MGA-665P8 Typical Scattering Parameters, TC = 25C, ZO = 50 , VD = 3 V, VC = 0 V, ID = 20.5 mA (ON State)[12] Freq (GHz) 0.1 0.5 1.0 1.5 2.0 2.2 2.4 2.6 2.8 3.0 3.5 4.0 4.5 5.0 5.2 5.4 5.6 5.8 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 dB -0.25 -3.06 -6.47 -8.71 -9.92 -10.43 -10.81 -10.87 -11.21 -11.15 -11.06 -10.12 -9.47 -8.18 -7.68 -6.84 -6.02 -5.50 -5.29 -4.07 -6.82 -10.75 -14.80 -23.35 -21.41 -14.29 -7.391 -5.65 -7.45 -13.56 -6.06 S11 Ang (deg) -12.7 -43.6 -60.0 -70.1 -79.8 -80.6 -82.8 -85.3 -86.9 -87.1 -91.1 -95.5 -97.1 -105.0 -107.0 -110.0 -116.6 -122.8 -131.6 -176.2 145.9 105.8 69.1 11.8 1.7 -128.0 170.2 121.1 88.6 97.3 130.6 dB 15.56 21.14 21.60 20.63 19.48 19.00 18.60 18.18 17.83 17.47 16.74 16.08 15.85 15.64 15.80 15.92 15.95 15.99 15.89 13.91 8.74 3.65 -1.02 -5.80 -11.15 -13.94 -13.07 -13.43 -12.92 -11.57 -10.23 S21 Ang (deg) 43.5 0.9 -41.0 -71.4 -95.6 -104.3 -112.5 -120.3 -128.1 -135.3 -153.1 -170.1 171.4 154.2 146.6 137.7 128.2 118.4 107.6 51.1 1.9 -30.7 -56.3 -79.7 -95.8 -100.4 -123.0 -170.4 138.4 87.6 31.6 dB -60.00 -60.00 -60.00 -53.98 -53.98 -50.46 -50.46 -50.46 -47.96 -47.96 -46.02 -43.10 -40.92 -40.00 -40.00 -39.17 -38.42 -37.72 -37.72 -36.48 -33.98 -37.08 -31.37 -27.96 -40.00 -27.74 -21.41 -19.33 -17.14 -15.39 -14.11 S12 Ang (deg) 114.3 104.2 101.8 100.7 94.4 93.6 90.8 89.2 91.5 89.1 84.8 74.6 83.7 67.7 70.3 70.1 66.2 61.9 57.5 45.9 9.9 30.5 -7.1 -46.2 -35.5 -55.3 -106.8 -159.0 158.4 117.3 66.8 dB -10.17 -13.64 -14.38 -15.28 -17.27 -18.06 -18.56 -19.41 -20.00 -21.01 -22.85 -26.20 -23.61 -24.01 -23.22 -21.94 -21.62 -21.83 -24.15 -18.56 -18.42 -16.42 -13.15 -11.21 -9.76 -8.27 -7.41 -7.35 -7.33 -7.64 -7.74 S22 Ang (deg) -39.8 -18.8 -23.2 -31.9 -39.4 -41.9 -45.9 -49.2 -53.7 -57.4 -62.4 -74.7 -88.6 -105.7 -106.5 -114.1 -129.5 -137.6 -149.1 175.5 156.6 115.7 94.7 79.5 75.1 67.8 59.7 52.1 45.7 37.3 31.6 K-factor 30.94 19.48 23.35 16.71 17.69 18.63 14.68 15.31 13.34 10.11 7.92 6.98 6.70 5.73 4.95 4.35 4.33 3.99 7.11 20.97 19.14 22.41 160.24 49.64 17.56 12.69 10.47 8.75 4.98
8
8. MGA-665P8 Typical Noise Parameters, TC = 25C, ZO = 50 , VD = 3 V, VC = 0 V, ID = 20.5 mA[12] Freq (GHz) 0.5 1.0 1.5 2.0 2.4 2.8 3.2 3.5 4.0 4.5 5.0 5.2 5.4 5.6 5.8 6.0 7.0 8.0 9.0 10.0 NFmin (dB) 1.48 1.27 1.10 1.08 1.18 1.24 1.32 1.36 1.45 1.50 1.46 1.42 1.42 1.40 1.40 1.46 2.08 3.35 5.50 8.74 Gamma Opt Mag 0.61 0.54 0.53 0.55 0.50 0.48 0.45 0.43 0.37 0.34 0.34 0.35 0.35 0.36 0.36 0.34 0.36 0.30 0.21 0.11 Ang (deg) 26.8 32.1 42.0 44.3 53.2 61.3 69.3 75.9 88.6 97.9 102.9 107.8 111.3 114.3 120.1 128.3 148.2 176.0 -150.6 -106.6 Rn @ 50 ohm 0.61 0.35 0.30 0.31 0.29 0.27 0.24 0.23 0.20 0.18 0.16 0.15 0.14 0.13 0.13 0.13 0.11 0.14 0.36 1.00 NF50 (dB) 2.49 1.83 1.62 1.65 1.67 1.70 1.71 1.73 1.74 1.75 1.69 1.67 1.66 1.65 1.67 1.72 2.37 3.55 5.61 8.77
25
6
20
5
NOISE FIGURE (dB)
GAIN (dB)
15
MAG GAIN NFmin NF50
4
10
3
5
2
1 0 0.5 1.5 2.5 3.5 4.5 5.5 6.5 7.5 8.5 9.5
9
9. MGA-665P8 Typical Scattering Parameters, TC = 25C, ZO = 50 , VD = 3 V, VC = 3 V, ID = 180 A (OFF State)[12] Freq (GHz) 0.1 0.5 1.0 1.5 2.0 2.2 2.4 2.6 2.8 3.0 3.5 4.0 4.5 5.0 5.2 5.4 5.6 5.8 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 dB -0.04 -0.26 -0.27 -0.34 -0.37 -0.40 -0.46 -0.51 -0.55 -0.47 -0.52 -0.57 -0.47 -0.41 -0.28 -0.05 0.04 0.02 -0.48 -1.03 -0.98 -1.77 -1.45 -1.72 -2.50 -2.56 -3.25 -2.03 -2.15 -4.45 -8.45 S11 Ang (deg) -2.2 -8.2 -15.6 -23.3 -32.9 -36.0 -38.9 -42.2 -44.9 -48.0 -55.4 -62.3 -69.3 -76.0 -78.3 -81.2 -86.1 -89.6 -94.1 -111.8 -119.5 -137.0 -143.7 -166.6 173.7 155.8 145.4 126.4 102.9 75.0 108.0 dB -50.46 -46.02 -43.10 -39.17 -37.08 -35.92 -35.92 -34.89 -34.42 -33.15 -33.56 -30.17 -29.37 -28.18 -28.40 -27.54 -27.13 -26.20 -26.02 -19.58 -28.18 -28.87 -32.04 -34.89 -37.08 -24.88 -16.25 -15.65 -13.85 -10.17 -8.64 S21 Ang (deg) 100.6 66.3 58.7 51.7 44.3 46.8 44.4 37.8 40.0 35.5 29.6 23.2 17.6 7.5 5.5 2.2 0.5 -5.3 -10.3 -46.8 -141.7 -102.7 170.5 148.1 97.0 -0.2 -75 -138.4 -172.9 147.1 75.1 dB -53.98 -46.02 -41.94 -39.17 -37.08 -36.48 -35.39 -34.89 -34.42 -33.98 -33.15 -29.90 -29.63 -28.40 -28.18 -27.74 -26.94 -26.38 -26.02 -19.66 -28.40 -26.94 -33.15 -37.72 -37.08 -25.04 -15.97 -15.55 -13.94 -10.31 -8.68 S12 Ang (deg) 70.9 55.5 53.5 51.6 45.4 44.6 42.5 38.6 38.3 35.2 27.2 23.4 18.3 5.6 4.4 2.5 -1.5 -5.8 -10.8 -47.2 -142.7 -110.8 165.2 145.6 105.5 1.3 -74.9 -137.8 -172.1 147.6 75.9 dB -0.09 -0.10 -0.26 -0.54 -0.91 -1.05 -1.19 -1.36 -1.55 -1.81 -2.27 -2.95 -3.56 -4.17 -4.25 -4.39 -4.67 -4.87 -5.26 -6.02 -6.80 -7.19 -7.90 -9.09 -8.20 -7.23 -7.92 -5.97 -5.10 -5.76 -7.92 S22 Ang (deg) -1.9 -8.4 -17.0 -25.8 -33.1 -36.5 -40.2 -43.3 -47.4 -50.5 -58.9 -65.3 -75.8 -80.6 -83.6 -87.1 -90.0 -92.6 -95.6 -114.4 -113.8 -130.3 -150.5 179.6 166.6 136.5 120.9 112.6 95.7 75.8 78.8
Note: 12. Measurements are made to the package leads as the reference plane.
10
Device Models Refer to Agilent's Web Site www.agilent.com/view/rf Part Number Ordering Information Part Number MGA-665P8-TR1 MGA-665P8-TR2 MGA-665P8-BLK No. of Devices 3000 10000 100 Container 7" Reel 13" Reel antistatic bag
2x2 LPCC (JEDEC DFP-N) Package Dimensions
D1 P PIN 1 PIN 1 D
1
8
R E1 e
2
7
1AX
3 6 4 5
E
b
L
BOTTOM VIEW
TOP VIEW
A
A1 A2 SIDE VIEW END VIEW
A
SYMBOL A A1 A2 b D D1 E E1 e
MIN. 0.70 0.00 0.225 1.9 0.65 1.9 1.45
DIMENSIONS NOM. 0.75 0.02 0.203 REF 0.25 2.0 0.80 2.0 1.6 0.50 BSC.
MAX. 0.80 0.05 0.275 2.1 0.95 2.1 1.75
NOTE: MEASUREMENTS ARE IN MILLIMETERS.
11
PCB Land Pattern and Stencil Design
2.80 (110.24) 0.70 (27.56) 0.25 (9.84) PIN 1 0.20 (7.87) 0.50 (19.68) 0.28 (10.83) SOLDER MASK 1.60 (62.99) 0.25 (9.84)
PIN 1
2.72 (107.09) 0.63 (24.80) 0.22 (8.86) 0.32 (12.79)
0.50 (19.68) 0.25 (9.74) 1.54 (60.61)
0.60 (23.62) RF TRANSMISSION LINE 0.80 (31.50) 0.15 (5.91) 0.55 (21.65)
0.72 (28.35)
0.63 (24.80)
PCB LAND PATTERN (TOP VIEW)
STENCIL LAYOUT (TOP VIEW)
NOTE: TYPICAL STENCIL THICKNESS IS 5 MILS. MEASUREMENTS ARE IN MILLIMETERS (MILS).
Device Orientation
REEL
4 mm
CARRIER TAPE 8 mm USER FEED DIRECTION 1AX 1AX 1AX 1AX
COVER TAPE
12
Tape Dimensions
D P P0 P2
E
W
F
D1
t1
Tt K0 B0
10 MAX. A0
10 MAX.
DESCRIPTION CAVITY LENGTH WIDTH DEPTH PITCH BOTTOM HOLE DIAMETER PERFORATION DIAMETER PITCH POSITION CARRIER TAPE WIDTH THICKNESS COVER TAPE DISTANCE WIDTH TAPE THICKNESS CAVITY TO PERFORATION (WIDTH DIRECTION) CAVITY TO PERFORATION (LENGTH DIRECTION)
SYMBOL A0 B0 K0 P D1 D P0 E W t1 C Tt F P2
SIZE (mm) 2.30 0.05 2.30 0.05 1.00 0.05 4.00 0.10 1.00 0.25 1.50 0.10 4.00 0.10 1.75 0.10 8.00 + 0.30 8.00 - 0.10 0.254 0.02 5.4 0.10 0.062 0.001 3.50 0.05 2.00 0.05
SIZE (inch) 0.091 0.004 0.091 0.004 0.039 0.002 0.157 0.004 0.039 0.002 0.060 0.004 0.157 0.004 0.069 0.004 0.315 0.012 0.315 0.004 0.010 0.0008 0.205 0.004 0.0025 0.0004 0.138 0.002 0.079 0.002
13
www.agilent.com/semiconductors
For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright (c) 2005 Agilent Technologies, Inc. February 2, 2005 5989-2314EN


▲Up To Search▲   

 
Price & Availability of MGA-665P8-BLK

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X